Skip to content

How-to guide

How to Calculate Energy Stored in Inductor: Formula, Steps & Examples

Learn how to calculate Energy Stored in Inductor — the formula explained step by step, with worked examples and a free calculator to check your answer.

By Arjun Desai, B.Tech (Engineering) · Updated Jun 2026 · 2 min read

Calculating your stored energy is straightforward once you know the Energy Stored in Inductor formula and what each input means. This guide explains the method in plain language, walks through a manual calculation, and gives worked examples you can follow — then you can do it instantly with the Energy Stored in Inductor Calculator.

What is Energy Stored in Inductor?

The Energy Stored in Inductor calculation tells you your stored energy from a few simple inputs. The figure you are solving for here is the stored energy.

The Energy Stored in Inductor formula

The core formula is:

Stored energy = 0.5 × Inductance × Current ^ 2

Here is what each input means:

  • Inductance — a value measured in H. Example: 0.5 H.
  • Current — a value measured in A. Example: 2 A.

How to calculate it step by step

  • Write down the inductance (for example, 0.5 H).
  • Write down the current (for example, 2 A).
  • Apply the formula above to get your stored energy.
  • Double-check the result with the Energy Stored in Inductor Calculator.

Worked examples

Example 1

Input / OutputValue
Inductance0.5 H
Current2 A
Stored energy1.0000

With inductance of 0.5 H and current of 2 A, the stored energy works out to 1.0000.

Example 2

With inductance of 1 H and current of 2 A, the stored energy works out to 2.0000.

ResultValue
Stored energy2.0000

Example 3

With inductance of 2.5 H and current of 2 A, the stored energy works out to 5.0000.

ResultValue
Stored energy5.0000

Tips for an accurate result

  • Keep your units consistent — mixing, say, months with years or grams with kilograms is the most common source of error.
  • Round only at the very end. Rounding inputs early can shift the final answer noticeably.
  • Re-run the numbers whenever an input changes, rather than estimating from an old result.

Prefer not to do the maths by hand? — the Energy Stored in Inductor Calculator does it instantly, for free, with the formula and a worked example built in.

Continue exploring electrical calculators with these tools: Wire Resistance Calculator, Watts to Amps Calculator, kVA to kW Calculator, kWh to Joules Calculator, Resistance from Power Calculator.

Calculators in this guide

Frequently asked questions

The formula is: Stored energy = 0.5 × Inductance × Current ^ 2. With inductance of 0.5 H and current of 2 A, the stored energy works out to 1.0000.

Gather each input, apply the formula step by step keeping your units consistent, and round only at the end. You can verify your answer instantly with the Energy Stored in Inductor Calculator.

It uses the standard formula with exact arithmetic, so the result is correct for the inputs you enter. Bear in mind that real-world outcomes can still differ when underlying assumptions change.

Arjun Desai · B.Tech (Engineering)

Arjun Desai is an engineer who writes about the practical physics, electronics and energy calculations behind everyday technology.