Skip to content

How-to guide

How to Calculate Rebar Weight: Formula, Steps & Examples

Learn how to calculate Rebar Weight — the formula explained step by step, with worked examples and a free calculator to check your answer.

By Arjun Desai, B.Tech (Engineering) · Updated Jun 2026 · 2 min read

Calculating your total weight is straightforward once you know the Rebar Weight formula and what each input means. This guide explains the method in plain language, walks through a manual calculation, and gives worked examples you can follow — then you can do it instantly with the Rebar Weight Calculator.

What is Rebar Weight?

The Rebar Weight calculation tells you your total weight from a few simple inputs. The figure you are solving for here is the total weight.

The Rebar Weight formula

The core formula is:

Total weight = Bar diameter × Bar diameter ÷ 162 × Total length

Here is what each input means:

  • Bar diameter — a value measured in mm. Example: 12 mm.
  • Total length — a value measured in m. Example: 100 m.

How to calculate it step by step

  • Write down the bar diameter (for example, 12 mm).
  • Write down the total length (for example, 100 m).
  • Apply the formula above to get your total weight.
  • Double-check the result with the Rebar Weight Calculator.

Worked examples

Example 1

Input / OutputValue
Bar diameter12 mm
Total length100 m
Total weight88.89
Weight per metre0.889

With bar diameter of 12 mm and total length of 100 m, the total weight works out to 88.89.

Example 2

With bar diameter of 24 mm and total length of 100 m, the total weight works out to 355.56.

ResultValue
Total weight355.56
Weight per metre3.556

Example 3

With bar diameter of 6 mm and total length of 100 m, the total weight works out to 22.22.

ResultValue
Total weight22.22
Weight per metre0.222

Tips for an accurate result

  • Keep your units consistent — mixing, say, months with years or grams with kilograms is the most common source of error.
  • Round only at the very end. Rounding inputs early can shift the final answer noticeably.
  • Re-run the numbers whenever an input changes, rather than estimating from an old result.

Prefer not to do the maths by hand? — the Rebar Weight Calculator does it instantly, for free, with the formula and a worked example built in.

Continue exploring construction calculators with these tools: Carpet Calculator, Roof Shingle Bundles Calculator, Mortar Bags Calculator, Concrete Bags Calculator, Siding Calculator.

Calculators in this guide

Frequently asked questions

The formula is: Total weight = Bar diameter × Bar diameter ÷ 162 × Total length. With bar diameter of 12 mm and total length of 100 m, the total weight works out to 88.89.

Gather each input, apply the formula step by step keeping your units consistent, and round only at the end. You can verify your answer instantly with the Rebar Weight Calculator.

It uses the standard formula with exact arithmetic, so the result is correct for the inputs you enter. Bear in mind that real-world outcomes can still differ when underlying assumptions change.

Arjun Desai · B.Tech (Engineering)

Arjun Desai is an engineer who writes about the practical physics, electronics and energy calculations behind everyday technology.