Skip to content

How-to guide

How to Calculate Horsepower to Torque: Formula, Steps & Examples

Learn how to calculate Horsepower to Torque — the formula explained step by step, with worked examples and a free calculator to check your answer.

By Arjun Desai, B.Tech (Engineering) · Updated Jun 2026 · 2 min read

Calculating your torque is straightforward once you know the Horsepower to Torque formula and what each input means. This guide explains the method in plain language, walks through a manual calculation, and gives worked examples you can follow — then you can do it instantly with the Horsepower to Torque Calculator.

What is Horsepower to Torque?

The Horsepower to Torque calculation tells you your torque from a few simple inputs. The figure you are solving for here is the torque.

The Horsepower to Torque formula

The core formula is:

Torque = Horsepower × 5252 ÷ Engine speed

Here is what each input means:

  • Horsepower — a value measured in hp. Example: 200 hp.
  • Engine speed — a value measured in rpm. Example: 6,000 rpm.

How to calculate it step by step

  • Write down the horsepower (for example, 200 hp).
  • Write down the engine speed (for example, 6,000 rpm).
  • Apply the formula above to get your torque.
  • Double-check the result with the Horsepower to Torque Calculator.

Worked examples

Example 1

Input / OutputValue
Horsepower200 hp
Engine speed6,000 rpm
Torque175.1

With horsepower of 200 hp and engine speed of 6,000 rpm, the torque works out to 175.1.

Example 2

With horsepower of 400 hp and engine speed of 6,000 rpm, the torque works out to 350.1.

ResultValue
Torque350.1

Example 3

With horsepower of 100 hp and engine speed of 6,000 rpm, the torque works out to 87.5.

ResultValue
Torque87.5

Tips for an accurate result

  • Keep your units consistent — mixing, say, months with years or grams with kilograms is the most common source of error.
  • Round only at the very end. Rounding inputs early can shift the final answer noticeably.
  • Re-run the numbers whenever an input changes, rather than estimating from an old result.

Prefer not to do the maths by hand? — the Horsepower to Torque Calculator does it instantly, for free, with the formula and a worked example built in.

Continue exploring automotive calculators with these tools: Engine Displacement Calculator, Compression Ratio Calculator, Gear Ratio Calculator, Tire Size Calculator, Car Lease Calculator.

Calculators in this guide

Frequently asked questions

The formula is: Torque = Horsepower × 5252 ÷ Engine speed. With horsepower of 200 hp and engine speed of 6,000 rpm, the torque works out to 175.1.

Gather each input, apply the formula step by step keeping your units consistent, and round only at the end. You can verify your answer instantly with the Horsepower to Torque Calculator.

It uses the standard formula with exact arithmetic, so the result is correct for the inputs you enter. Bear in mind that real-world outcomes can still differ when underlying assumptions change.

Arjun Desai · B.Tech (Engineering)

Arjun Desai is an engineer who writes about the practical physics, electronics and energy calculations behind everyday technology.